耐磨彎頭

Features

  1. The service life is more than 15 times longer than the average elbow.
  2. When the semi-conical tube ring-type pressurized buffer chamber is damaged in long-term use, it can be replaced without the need for the entire set of elbows to be scrapped.
  3. It is not necessary to remove the pipeline to replace the above-mentioned chamber cover, which saves time and convenience and improves the movement rate of the machine.
  4. The entrance of the chamber and the tip of the tongue are designed to be thicker due to the greater impact force, which can increase the service life.
  5. The chamber can be removed regularly to check the wear and tear, and pre-maintain it to avoid loss and pollution caused by accidental damage.
  6. The separated combined elbow makes the casting sand easy to clean, which can prevent a large amount of casting sand or burrs from being mixed into the conveying material.
  7. The use of the same chamber for 45° and 90° saves the cost of purchasing pre-repair products.
  8. Less pressure loss and energy saving. No direct impact, low noise and wear resistance.
外型尺寸圖
Specification Ød Øg ØD c n Øh f t l H L

Weight
(kg)
1 1/2 41.6 85 140 105 4 18 2 14 65 150 184 8.2
2 52.9 100 155 120 4 18 2 16 80 190 218 10.6
2 1/2 67.3 120 175 140 4 18 2 18 85 205 247 15.5
3 80.1 130 185 150 8 18 2 19 95 245 283 20.9
4 104.5 155 210 175 8 18 2 20 110 310 355 41.3
5 129.6 185 250 210 8 24 2 23 125 350 427 55
6 154.2 215 280 240 8 24 2 23 145 425 493 70
8 203.5 265 330 290 12 24 2 23 165 500 610 134
10 254.6 325 400 355 12 26 2 28 200 600 736 195
12 305.7 370 445 400 16 26 3 29 220 740 874 251
  • Specifications and dimensions are subject to change without notice.
  • Customization for special specification and requirement is available.
外型尺寸圖
Specification Ød Øg ØD c n Øh f t H L Weight
(kg)
1 1/2 41.6 85 140 105 4 18 2 14 130 193 8
2 52.9 100 155 120 4 18 2 16 155 223 10.6
2 1/2 67.3 120 175 140 4 18 2 18 165 251 15
3 80.1 130 185 150 8 18 2 19 198 297 20.7
4 104.5 155 210 175 8 18 2 20 228 374 37.3
5 129.6 185 250 210 8 24 2 23 262 447 53
6 154.2 215 280 240 8 24 2 23 292 515 67
8 203.5 265 330 290 12 24 2 23 360 645 130
10 254.6 325 400 355 12 26 2 28 416 762 193
12 305.7 370 445 400 16 26 3 29 484 917 248
  • Specifications and dimensions are subject to change without notice.
  • Customization for special specification and requirement is available.
壓濾機濾板

Features

1. The service life is more than 15 times longer than the average elbow.

2. When the semi-conical tube ring-type pressurized buffer chamber is damaged in long-term use, it can be replaced without the need for the entire set of elbows to be scrapped.

3. It is not necessary to remove the pipeline to replace the above-mentioned chamber cover, which saves time and convenience and improves the movement rate of the machine.

4. The entrance of the chamber and the tip of the tongue are designed to be thicker due to the greater impact force, which can increase the service life.

5. The chamber can be removed regularly to check the wear and tear, and pre-maintain it to avoid loss and pollution caused by accidental damage.

6. The separated combined elbow makes the casting sand easy to clean, which can prevent a large amount of casting sand or burrs from being mixed into the conveying material.

7. The use of the same chamber for 45° and 90° saves the cost of purchasing pre-repair products.

8. Less pressure loss and energy saving. No direct impact, low noise and wear resistance.

45 Degree Dimensional Drawing

外型尺寸圖
Specification Ød Øg ØD c n Øh f t l H L

Weight
(kg)
1 1/2 41.6 85 140 105 4 18 2 14 65 150 184 8.2
2 52.9 100 155 120 4 18 2 16 80 190 218 10.6
2 1/2 67.3 120 175 140 4 18 2 18 85 205 247 15.5
3 80.1 130 185 150 8 18 2 19 95 245 283 20.9
4 104.5 155 210 175 8 18 2 20 110 310 355 41.3
5 129.6 185 250 210 8 24 2 23 125 350 427 55
6 154.2 215 280 240 8 24 2 23 145 425 493 70
8 203.5 265 330 290 12 24 2 23 165 500 610 134
10 254.6 325 400 355 12 26 2 28 200 600 736 195
12 305.7 370 445 400 16 26 3 29 220 740 874 251
  • Specifications and dimensions are subject to change without notice.
  • Customization for special specification and requirement is available.

90 Degree Dimensional Drawing

外型尺寸圖
Specification Ød Øg ØD c n Øh f t H L Weight
(kg)
1 1/2 41.6 85 140 105 4 18 2 14 130 193 8
2 52.9 100 155 120 4 18 2 16 155 223 10.6
2 1/2 67.3 120 175 140 4 18 2 18 165 251 15
3 80.1 130 185 150 8 18 2 19 198 297 20.7
4 104.5 155 210 175 8 18 2 20 228 374 37.3
5 129.6 185 250 210 8 24 2 23 262 447 53
6 154.2 215 280 240 8 24 2 23 292 515 67
8 203.5 265 330 290 12 24 2 23 360 645 130
10 254.6 325 400 355 12 26 2 28 416 762 193
12 305.7 370 445 400 16 26 3 29 484 917 248
  • Specifications and dimensions are subject to change without notice.
  • Customization for special specification and requirement is available.

Other Equipment

Contact Us

Other Equipment

Contact Us